Tesla mini connector kit

Tesla connector kit for cables or charging station pigtails using a Duosida (Dostar) connector.
59,95 € incl tax
Shipping: Same or next working day

This kit includes everything you need to upgrade an existing Duosida connector with the Tesla button. The kit can be used for all cables and fixed charging station pigtails that have a Duosida (Dostar) connector with a 16 or 18mm rear end opening as depicted in the photo. Make your choice of a 16A or 32A kit. It is VERY important to use the correct kit, since a 32A connector on a 16A cable can overheat the cable, while a 16A connector on a 32A cable will only allow charging at 16A...

The Patent Pending design of the EVChargeKing connector allows the integration of the Tesla command button in the housing in such a way that it can be re-opened, while remaining 100% waterproof. All necessary electrical requirements for the cable are present in the electronics, so all you need to do is cut the existing resistor from the small cable going from PE to PP inside the connector, solder on the kit's button, install the new housing and button, and you are good to go!

The connector can be used for single and 3-phase cable assemblies having a diamter of max 18mm.

For full installation instructions, click here

Except for the "Lucky 7" versions, our EV cables are made-to-order (custom made) for each customer order. Please refer to the return & refunds page if the cable shipped is defective or damagedWe encourage all consumers to carefully choose the length of the EV cable and type of EV cable before placing an order, to avoid ordering either the wrong length or cable type. We are more than happy to answer questions from the customer before the order is placed, such that the customer can purchase the correct EV cable for their needs.