Availability

Male Type 2 connector

Complete male type 2 connector with crimping terminals for 16A or 32A single or 3-phase application.

Select the smallest diameter that fits over your cable

89,00 € incl tax
Shipping: Same or next working day

The maele connector is used on the infrastructure side of a charging cable, and comes in 16A (2.5 mm² conductors) or 32A (6 mm² conductors) versions.

The terminals need to be crimped onto the wires! Note that this takes special tooling, the terminals need quite some force to be crimped and it needs to be done correctly to avoid overheating resulting in fire. We use specialised machines or a harting crimping tool to crimp the 2.5 and 6mm² terminals:

The connectors have a blue housing and come with either a 16mm or 18mm diameter backend screw. Please measure the diameter of your cable and order accordingly. The maximum diameter of the cable is 18mm!

The kit comes with pre-assembled PP signal pin using a 220 Ohm (32A) or 680 Ohm (16A) resistance ready for mounting. Inner glue-lined heat shrinks are provided for additional cable protection.

Except for the "Lucky 7" versions, our EV cables are made-to-order (custom made) for each customer order. Please refer to the return & refunds page if the cable shipped is defective or damagedWe encourage all consumers to carefully choose the length of the EV cable and type of EV cable before placing an order, to avoid ordering either the wrong length or cable type. We are more than happy to answer questions from the customer before the order is placed, such that the customer can purchase the correct EV cable for their needs.