Availability

e-TAP 7.4 kW Mobile charger for Tesla

Single phase 32A adjustable mobile charger to charge your electric vehicle from a blue 32A single phase CEE commando socket.
Old price: 519,00 € incl tax
Price: 469,00 € incl tax

439,00 € incl tax
Shipping: Same or next working day

Our e-TAP 7.4 kW 7 meter length Tesla mobile charger can be used to charge your Tesla from a red 32A 3-phase CEE socket. The power is adjustable to 6A, 10A, 13A, 16A, 20A, 25A or 32A. Your electric vehicle will charge at a maximum rate of 7.4 kW. The type 2 connector has the very convenient Tesla button built-in. (The charger can be used to charge other type 2 cars as well!)

The charger has a multitude of safety features, including monitoring of the CEE plug temperature, AC and DC residual current leak detection, overheating, ...

Please make sure you charge from a correctly installed blue 32A CEE socket as depicted on the left, that is rated to deliver 32A, installed with minimum 6mm² wires. You can order a high quality wall socket that is IP 67 rated for in- or outdoor use with the charger.

 

The charger features:

  • Earth leakage protection (AC and DC)
  • Internal current switching problem detection
  • Over current protection
  • Over voltage protection
  • Low voltage protection
  • Short circuit protection
  • Overheat protection
  • Wall plug overheat protection
  • Adjustable charging amps (6/10/13/16/20/25/32A)

This mobile charger will also work in case neutral and phase are reversed or when neutral is missing alltogether (3 x 230V network). This is where the Tesla supplied mobile charger will fail to charge... Our charger will work and provides a much cheaper alternative to the Tesla supplied Mennekes Schuko, with the added benefit of having the Tesla control button in the plug!

Download the e-TAP manual by clicking here

Specifications:

Connector Type 2 female plug with Tesla control button
Cable Single phase, 3 x 6mm² + 0.75mm². Rated charging current: 32A (7.4 kW charging capability)*
Color Grey / Blue / Black
IP Rating IP65
Electric supply connector CEE32A commando socket (blue 3-pin plug for 32A)
Housing & Dimensions Aluminium housing: heigth: 50mm x width: 80mm x length: 190mm - Total Cable length: 7m
Weight 3,35 kg
Charging Specification Mode 3 / IEC 61851 communication unit Compliant to: withIEC 62196, IEC 61851-1, CE, EMC, RoHS
Charging Output 32A / Single Phase unit: max 7.4kW @ 230V 
Overcurrent & Fault Protection RCD typeA-EV (30mA AC, 6mA DC)
Status Indication Tri-Colour LED
Operating temperature –25°C to 50°C

*Max current and charging time depends on the characteristics of the electric vehicle that is being charged. The EVSE can limit max current in extreme temperatures.

Except for the "Lucky 7" versions, our EV cables are made-to-order (custom made) for each customer order. Please refer to the return & refunds page if the cable shipped is defective or damagedWe encourage all consumers to carefully choose the length of the EV cable and type of EV cable before placing an order, to avoid ordering either the wrong length or cable type. We are more than happy to answer questions from the customer before the order is placed, such that the customer can purchase the correct EV cable for their needs.