
Our e-TAP 22 kW 7 meter length Tesla mobile charger can be used to charge your Tesla from a red 32A 3-phase CEE socket. The power is adjustable to 3x6A, 3x10A, 3x13A, 3x16A 3x20A, 3x25A or 3x32A. Your electric vehicle will charge at a maximum rate of 22 kW. The type 2 connector has the very convenient Tesla button built-in. (The charger can be used to charge other type 2 cars as well!)
The charger has a multitude of safety features, including monitoring of the CEE plug temperature, AC and DC residual current leak detection, overheating, ...
Please make sure you charge from a correctly installed red 32A CEE socket as depicted on the left, that is rated to deliver 3x32A, installed with minimum 6mm² wires. You can order a high quality wall socket that is IP 67 rated for in- or outdoor use with the charger.
The charger features:
- Earth leakage protection (AC and DC)
- Internal current switching problem detection
- Over current protection
- Over voltage protection
- Low voltage protection
- Short circuit protection
- Overheat protection
- Wall plug overheat protection
- Adjustable charging amps (3x 6/10/13/16/20/25/32A)
This mobile charger will also work in case neutral and phase are reversed or when neutral is missing alltogether (3 x 230V network). This is where the Tesla supplied mobile charger will fail to charge... Our charger will work and provides a much cheaper alternative to the Tesla supplied Mennekes Schuko, with the added benefit of having the Tesla control button in the plug! Be advised that in this case the total charging power will be around 8.5 kW.
Download the e-TAP manual by clicking here
Specifications:
Connector |
Type 2 female plug with Tesla control button |
Cable |
3 - phase, 5 x 6mm² + 0.75mm². Rated charging current: 3 x 32A (22 kW charging capability)* |
Color |
Grey / Blue / Black |
IP Rating |
IP65 |
Electric supply connector |
CEE32 (red 5-pin plug for 3 x 32A) |
Housing & Dimensions |
Aluminium housing: heigth: 50mm x width: 80mm x length: 190mm - Total Cable length: 7m |
Weight |
4,90 kg |
Charging Specification |
Mode 3 / IEC 61851 communication unit Compliant to: withIEC 62196, IEC 61851-1, CE, EMC, RoHS |
Charging Output |
32A / 3 Phase unit: max 22kW @ 3-phase 400V |
Overcurrent & Fault Protection |
RCD typeA-EV (30mA AC, 6mA DC) |
Status Indication |
Tri-Colour LED |
Operating temperature |
–25°C to 50°C |
*Max current and charging time depends on the characteristics of the electric vehicle that is being charged. The EVSE can limit max current in extreme temperatures.