This charging cable has a Type 3C connector at the infrastructure side of the cable and the Mennekes Type 2 connector at the vehicle side of the cable. This cable can be used for all cars having a Type 2 connector on the vehicle side and need a Type 3C connector on the infrastructure side, as is mostly the case in France. For the rest of Europe, you would need a type 2 - type 2 cable, sold elsewhere in the shop.
The cable has 5 x 6mm² conductors, allowing 32A current, which represents a charging capacity of 22 Kw. It is of course perfectly possible to charge at 16 or 32A single or 3-phase with this cable!
You can order any length you need by selecting the appropriate value in the dropdown selector. For lengths not specified in the list, just send us a message and we will quote you for your special request.
We don't use the typical Chinese cable, but a high quality VDE approved German cable, that is 20% lighter and thinner while being more durable! The connectors have rustfree contacts.
Don't forget to choose the right length when ordering. It is better to have 1 meter too long than 10cm too short! The length of the EV cable is measured including the plugs (male/ female) on either end of the EV cable.
Attention: An EV charging cable is NOT an extension cable:
Please note that charging cables cannot be used as extension cables and can only be used to connect your electric vehicle directly to a charging station. Connecting 2 cables will NOT work!
||Type 3C infrastructure side, Type 2 vehicle side
||3-phase, 5 x 6mm² + 0.5mm², max electric power: 3 x 32A (22 kW charging capability at 400V) VDE approved nr 8491 15/35 CE
||Blue / Black / Grey