This charging cable has a Type 2 connector at the infrastructure side of the cable and the J1772 Type 1 connector at the vehicle side of the cable. This cable can be used for all cars having a Type 1 connector on the vehicle side and a Type 2 connector on the infrastructure side, as is the case in most European countries, except for France. For France, you would need a type 3C - type 1 cable, available in our shop.
The cable has 3 x 6mm² conductors, allowing 32A current, which represents a charging capacity of 7.6Kw/h. The price difference with a weaker 16A cable is so small that we think you are better off with this top model. In case you switch to a bigger electric car or install a more performant charging infrastructure, you won't need to upgrade your cable.
It is of course perfectly possible to charge at 16A with this cable!
You can order any length you need by selecting the appropriate value in the dropdown selector. For lengths not specified in the list, just send us a message and we will quote you for your special request.
We don't use the typical Chinese cable, but a high quality European brand cable, that is 20% lighter and thinner while being more durable! The connectors have all rustfree contacts.
Don't forget to choose the right length when ordering. It is better to have 1 meter too long than 10cm too short! The length of the EV cable is measured including the plugs (male/ female) on either end of the EV cable.
Attention: An EV charging cable is NOT an extension cable:
Please note that charging cables cannot be used as extension cables and can only be used to connect your electric vehicle directly to a charging station. Connecting 2 cables will NOT work!
||Type 2 infrastructure side, J1772 Type 1 vehicle side
||Single phase, 3 x 6mm² + 0.5mm², max electric power: 1 x 32A (7.4 kW charging capability at 240V) VDE approved nr 8491 15/33 CE
||Blue / Black