This charging cable has a Type 3C connector at the infrastructure side of the cable and a Type 2 connector at the vehicle side of the cable. This cable can be used for all cars having a Type 2 connector on the vehicle side and need a Type 3C connector on the infrastructure side, as is mostly the case in France. For the rest of Europe, you would need a type 2 - type 2 cable, sold elsewhere in the shop.
The cable has 5 x 2.5mm² conductors, allowing 3x16A current, which represents a charging capacity of 11 kW. For vehicles having a maximum charging capacity of 11kW or lower, this 16A cable version weighs considerably less than the 32A version. If you have more than 11 kW capability, you need to use the 32A cable version!
You can order any length you need by selecting the appropriate value in the dropdown selector. Make sure you order the correct length, better one meter too long than 10cm too short! For lengths not specified in the list, just send us a message and we will quote you for your special request.
We don't use the typical Chinese cable, but a high quality European brand cable, that is 20% lighter and thinner while being more durable! The connectors have all rustfree contacts.
Don't forget to choose the right length when ordering. It is better to have 1 meter too long than 10cm too short! The length of the EV cable is measured including the plugs (male/ female) on either end of the EV cable.
Attention: An EV charging cable is NOT an extension cable:
Please note that charging cables cannot be used as extension cables and can only be used to connect your electric vehicle directly to a charging station. Connecting 2 cables will NOT work!
Specifications:
| Connectors |
Type 3C infrastructure side, Type 2 vehicle side |
| Cable |
3-phase, 5 x 2.5mm² + 0.75mm², max electric power: 3 x 16A (11 kW charging capability at 400V) |
| Color |
Blue / Black / Grey |
