This charging cable has Type 2 connectors on both ends of the cable (1 female, 1 male). This cable can be used for all cars having a Type 2 connector on the vehicle side and a Type 2 connector on the infrastructure side, as is the case in most European countries, except for France. For France, you could need a type 3C - type 2 cable, sold elsewhere in the shop.
The cable has 5 x 2.5mm² conductors, allowing 3 x 16A current, which represents a maximum charging capacity of 11 Kw. For vehicles having a maximum charging capacity of 11kW or lower, this 16A cable version weighs considerably less than the 32A version. If you have more than 11 kW capability, you need to use the 32A cable version!
You can order any length you need by selecting the appropriate value in the dropdown selector. For lengths not specified in the list, just send us a message and we will quote you for your special request.
We don't use the typical Chinese cable, but a high quality European brand cable, that is 20% lighter and thinner while being more durable! The connectors have rustfree contacts.
Don't forget to choose the right length when ordering! When the charging point is on the other side of the car's chargeport, you really need a minimum of 4 meter to be safe.
Attention: An EV charging cable is NOT an extension cable:
Please note that these cables are not extension cables and can only be used to connect your electric vehicle directly to a charging station. Connecting 2 cables will NOT work!
||Type 2 on both sides
||3-phase, 5 x 2.5mm² + 0.75mm², max electric power: 3 x 16A (11 kW charging capability at 240V) VDE approved nr 8491 15/35 CE
||Blue / Black