Verfügbarkeit

e-TAP 7.4 kW Mobile charger

1 x 32A adjustable mobile charger to charge your electric vehicle from a blue 32A single phase CEE commando socket.
Regulär: 479,00 € *
Preis 449,00 € *

Lieferzeit: Gleicher oder nächster Arbeitstag

Our e-TAP 7.4 kW 7 meter length mobile charger can be used to charge your electric vehicle from a blue 32A single phase CEE socket. The power is adjustable to 6A, 10A, 13A, 16A, 20A, 25A or 32A. Your electric vehicle will charge at a maximum rate of 7.4 kW.

The charger has a multitude of safety features, including monitoring of the CEE plug temperature, AC and DC residual current leak detection, overheating, ...

Please make sure you charge from a correctly installed blue 32A CEE socket as depicted on the left, that is rated to deliver 32A, installed with minimum 6mm² wires. You can order a high quality wall socket that is IP 67 rated for in- or outdoor use with the charger.
 

The charger features:

  • Earth leakage protection (AC and DC)
  • Internal current switching problem detection
  • Over current protection
  • Over voltage protection
  • Low voltage protection
  • Short circuit protection
  • Overheat protection
  • Wall plug overheat protection
  • Adjustable charging amps (6A,10A,13A,16A,20A,25A,32A)

This mobile charger will also work in case neutral and phase are reversed or when neutral is missing alltogether (3 x 230V network) and provided your car supports charging without neutral. 

Download the e-TAP manual by clicking here

Specifications:

Connector Type 2 female plug
Cable Single phase, 3 x 6mm² + 0.75mm². Rated charging current: 32A (7.4 kW charging capability)*
Color Grey / Blue / Black
IP Rating IP65
Electric supply connector CEE 32A (blue 3-pin plug for 32A commando socket)
Housing & Dimensions Aluminium housing: heigth: 50mm x width: 80mm x length: 190mm - Total Cable length: 7m
Weight 3,35kg
Charging Specification Mode 3 / IEC 61851 communication unit Compliant to: withIEC 62196, IEC 61851-1, CE, EMC, RoHS
Charging Output 32A / 7.4kW @ 1-phase 230V
Overcurrent & Fault Protection RCD typeA-EV (30mA AC, 6mA DC)
Status Indication Tri-Colour LED
Operating temperature –25°C to 50°C

*Max current and charging time depends on the characteristics of the electric vehicle that is being charged. The EVSE can limit max current in extreme temperatures.

Mit Ausnahme der "Lucky 7"-Versionen werden unsere EV-Kabel für jede Kundenbestellung individuell angefertigt. Bitte beachten Sie die Seite Rückgabe & Erstattungen, wenn das gelieferte Kabel defekt oder beschädigt ist. Wir empfehlen allen Verbrauchern, die Länge des EV-Kabels und den Typ des EV-Kabels sorgfältig auszuwählen, bevor sie eine Bestellung aufgeben, um zu vermeiden, dass sie entweder die falsche Länge oder den falschen Kabeltyp bestellen. Wir sind gerne bereit, Fragen des Kunden zu beantworten, bevor die Bestellung aufgegeben wird, so dass der Kunde das richtige EV-Kabel für seine Bedürfnisse kaufen kann.