Verfügbarkeit

e-TAP 22 kW Mobile charger for Tesla

3 x 32A adjustable mobile charger to charge your electric vehicle from a red 32A 3-phase CEE socket.
Regulär: 569,00 € *
Preis 539,00 € *

Lieferzeit: Gleicher oder nächster Arbeitstag

Our e-TAP 22 kW 7 meter length Tesla mobile charger can be used to charge your Tesla from a red 32A 3-phase CEE socket. The power is adjustable to 3x6A, 3x10A, 3x13A, 3x16A 3x20A, 3x25A or 3x32A. Your electric vehicle will charge at a maximum rate of 22 kW. The type 2 connector has the very convenient Tesla button built-in. (The charger can be used to charge other type 2 cars as well!)

The charger has a multitude of safety features, including monitoring of the CEE plug temperature, AC and DC residual current leak detection, overheating, ...

Please make sure you charge from a correctly installed red 32A CEE socket as depicted on the left, that is rated to deliver 3x32A, installed with minimum 6mm² wires. You can order a high quality wall socket that is IP 67 rated for in- or outdoor use with the charger.

 

The charger features:

  • Earth leakage protection (AC and DC)
  • Internal current switching problem detection
  • Over current protection
  • Over voltage protection
  • Low voltage protection
  • Short circuit protection
  • Overheat protection
  • Wall plug overheat protection
  • Adjustable charging amps (3x 6/10/13/16/20/25/32A)

This mobile charger will also work in case neutral and phase are reversed or when neutral is missing alltogether (3 x 230V network). This is where the Tesla supplied mobile charger will fail to charge... Our charger will work and provides a much cheaper alternative to the Tesla supplied Mennekes Schuko, with the added benefit of having the Tesla control button in the plug!

Download the e-TAP manual by clicking here

Specifications:

Connector Type 2 female plug with Tesla control button
Cable 3 - phase, 5 x 6mm² + 0.75mm². Rated charging current: 3 x 32A (22 kW charging capability)*
Color Grey / Blue / Black
IP Rating IP65
Electric supply connector CEE32 (red 5-pin plug for 3 x 32A)
Housing & Dimensions Aluminium housing: heigth: 50mm x width: 80mm x length: 190mm - Total Cable length: 7m
Weight 4,90 kg
Charging Specification Mode 3 / IEC 61851 communication unit Compliant to: withIEC 62196, IEC 61851-1, CE, EMC, RoHS
Charging Output 32A / 3 Phase unit: max 22kW @ 3-phase 400V 
Overcurrent & Fault Protection RCD typeA-EV (30mA AC, 6mA DC)
Status Indication Tri-Colour LED
Operating temperature –25°C to 50°C

*Max current and charging time depends on the characteristics of the electric vehicle that is being charged. The EVSE can limit max current in extreme temperatures.

Mit Ausnahme der "Lucky 7"-Versionen werden unsere EV-Kabel für jede Kundenbestellung individuell angefertigt. Bitte beachten Sie die Seite Rückgabe & Erstattungen, wenn das gelieferte Kabel defekt oder beschädigt ist. Wir empfehlen allen Verbrauchern, die Länge des EV-Kabels und den Typ des EV-Kabels sorgfältig auszuwählen, bevor sie eine Bestellung aufgeben, um zu vermeiden, dass sie entweder die falsche Länge oder den falschen Kabeltyp bestellen. Wir sind gerne bereit, Fragen des Kunden zu beantworten, bevor die Bestellung aufgegeben wird, so dass der Kunde das richtige EV-Kabel für seine Bedürfnisse kaufen kann.